drywall knife to smear spackling compound through the mesh and over each hole. If needed, apply a third skim coat after the second one dries. Let it dry overnight, sand lightly, then apply a second thin layer.Spread a layer of spackling compound over the patch with a 6-in.Peel off the paper backing and press the mesh to the wall. Then cut a piece of fiberglass mesh to overlap the hole by at least 1 in.Wipe off any sanding dust with a damp cloth. First, hand-sand around the hole to smooth any rough spots.We used a repair kit from Manco (less than $2) that includes a pair of 8×8-in. diameter:įor holes between 1/2 and 11/2 inch diameter, bridge the gap with a piece of adhesive-backed fiberglass mesh. Anything larger must be covered with a bridging material for strength before patching compound can be applied. Use a putty knife to fill them with spackling or wall joint compound.Īllow the area to dry, then sand lightly. Tiny nail and screw holes are the easiest to fix. How to Fill a Small Hole Fix tiny nail and screw holes: How you should proceed with your repair depends on the size of the hole you have to fix. Wall-repair kits, available at home centers and hardware stores, make it even easier. And if a small section of wall is really badly stained or damaged, you’ll have to cut out the affected area and cover the hole with a drywall patch.įortunately, fixing holes in drywall doesn’t require a lot of time or experience. No matter how careful you are, live in a home long enough, and you’ll find yourself with some holes in the walls to patch.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |